Pattex Wood Glue Economy - All Wood Work 250ml

Pattex Wood glues together all types of wood, wood composites and even laminates. Great for all indoor projects. Water-based, solvent-free and really strong, Pattex Wood glue gets the job done properly.

High bonding strengthEasy removal of adhesive residues 

Possible uses

For assembly bonding (dowel, tongue and groove, mortise and tenon)

For gluing joints

For surface bonding

Content: 250ml

Storage: Protect from frost. Temperatures below +5°C to be avoided

Key Notes

Allow glue crusts or dried-on glue residues to soak and swell for several days before removing them.Make sure to read the application and safety instructions given in our Technical Data Sheet and Safety Data Sheet.Surface preparation

The surfaces to be joined must have good accuracy of fit and must be free of grease, load-bearing and clean.

Adhesive application

Apply a thin regular layer of WOOD GLUE on one of the surfaces by brush or roller. For heavy wood,the glue should be applied on both surfaces. Join the two parts within the open time (approximately 15 minutes, depending on the temperature, humidity and type ofwood used). Press for 30 minutes, applying a pressure of 2 to 5 kg/cm². Pressing can either be hot or cold with the usual tools and appliances.

Application temperature

not below + 5° C (white point temperature)

Open time

max. 12 min. (at 20 °C), depending on room temperature, air humidity, wood moisture and amount of glue applied. Join the parts while the glue is still wet.

Consumption

Approx. 150 g/m², depending on the absorbency of the substrat